Tag

#guide

17 articles

Field Notes

FIELD NOTE8 min read

How to Assemble an AeroTech RMS Reload Without Guessing

An orientation to AeroTech RMS cases, delay drilling, o-rings, liners, and grain order — written to sit next to the instruction card.

Field Notes

FIELD NOTE10 min read

How to Size Black Powder Ejection Charges (and Prove Them on the Ground)

The D²×L and volume formulas for FFFFg ejection charges, worked examples for 3- and 4-inch bays, and a ground-test procedure.

Field Notes

FIELD NOTE8 min read

Finding a Lost High-Power Rocket: GPS, Beacons, and Search Technique

How to keep an L1 or L2 rocket findable: dual-deploy drift, GPS vs radio beacons, last-known coordinates, and a search pattern.

motors

7 min read

How to Read a Rocket Motor Code (H128W, J350W, and the Rest)

Decode hobby rocket motor designations — impulse letter, average thrust, propellant suffix, delay, NAR/TRA class ranges, and how to pick a delay.

beginner

2 min read

How to Talk to an RSO (and Not Get Sent Back to the Pits)

What a Range Safety Officer actually wants to hear: the flight card, the motor, the recovery, and the one sentence that keeps the line moving.

Field Notes

FIELD NOTE7 min read

Building an L2 Airframe That Survives J–L Motors

The build side of L2: 38 mm vs 54 mm mounts, rail buttons, kevlar and zipper control, coupler length, and recovery attachments.

L1

7 min read

Launch Day Checklist: What to Bring for Your First HPR Flight

A complete first-flight packing list for high-power rocketry — rocket, motor, tools, recovery gear, paperwork, and RSO inspection.

certification

7 min read

NAR vs Tripoli: Which Rocketry Organization Should You Join?

A practical comparison of NAR and Tripoli — membership dues, insurance, certification reciprocity, L2 exam differences, launch culture, and how to choose.

simulation

8 min read

Getting Started with OpenRocket: Simulate Your First Flight

OpenRocket is a free, open-source rocket flight simulator. You build a virtual model of your rocket and run a simulation.

L2

9 min read

Preparing for L2 Certification: What Changes After L1

Everything that's different about L2 certification — the written test, rocket requirements, motor selection, and what to expect on flight day.

building

9 min read

Beginner's Guide to Rocket Epoxy and Fillets

How to choose the right epoxy, mix it properly, and apply structural fillets that keep your fins attached through high-power flights.

building

10 min read

How to Finish and Paint Your Rocket: A Complete Guide

Step-by-step guide to surface prep, priming, painting, and clear coating your rocket — from filling spiral grooves to getting a smooth, professional finish.

building

7 min read

Rocket Motor Retention: Clips, Retainers, and How to Keep Your Motor In

Why ejection can spit a motor out the back of your rocket, and how to choose real retention — tape, Estes clips, and Aero Pack retainers.

Field Notes

FIELD NOTE8 min read

Shear Pins, Vent Holes, and Why Dual Deploy Still Fails

How many nylon pins a 3- or 4-inch coupler actually needs, why av-bay vents are not optional, and the failure modes of dual deploy.

physics

11 min read

Understanding Rocket Stability: CG, CP, and Why Your Rocket Needs Both

A clear explanation of center of gravity, center of pressure, stability margin, and how to make sure your rocket flies straight — not sideways.

L1

8 min read

How to Get Your L1 High-Power Rocketry Certification (2026)

Everything you need to know about L1 certification — NAR vs Tripoli, what kit to build, which motor to use, and what to expect on flight day.

recovery

14 min read

How to Set Up Dual Deployment for Your First High-Power Flight

A step-by-step guide to configuring drogue-at-apogee, main-at-altitude recovery for L1 and L2 high-power certification flights.

All guides
#guide articles | Burn Wire